Philips PM32671 Service Manual page 113

7-6
7.2.
PARTS NOT INDICATED WITH ITEM-NUMBERS IN THE FIGURES
Ordering nu
Ordering number
532227660208
532227670075
532227680237
5322 276 60209
532226824116
532226814141
5322 320 141 02
5322 320 10003
532226554006
532226750343
532226750341
532226764031
5322267 64027
532226764007
532226764007
532226540186
532226540187
5322 268 141 05
5322 268 14013
Description
Pushbutton switch S1 (on time base unit)
Pushbutton switch S2 and S3 (on time base unit)
...
Pushbutton switch S17 S20 (on pre-ampl. +trigger unit)
Pushbutton switch S22, S23 (on trigger unit)
Coaxial socket (p.c.b. type)
Contact pin for coaxial socket.
Coaxial cable set. This is a universal cable set. Always use the cable out of
this set with a length that comes close to the length of the cable that must
be replaced.
Coaxial cable per metre (without sockets)
20 pole CIS-connector, female p.c.b. type. This connector must be sawn
to the required size for: X807, X852, X858, X1406, X1501, X1502,
Double 4-pole CIS-connector! female p.c.b. "bottom entry" type. Used
for X204 (unit 21, X501, X502, X651 and X867 (unit 3).
Double 7-pole CIS-connector, female p,c.b. "bottm entry" type. Used for
X213 (unit 2)
8-pole CIS-connector, female p.c.b. type. This connector must be sawn
to the required size. Used for: X214 and X851.
8-pole CIS-connector, female p.c.b. type. This connector must be sawn
to the required size. Used for: X201, X202, X203 and X I 506.
20-pin CIS-contact block without pins. This block must be sawn to the
required size for: X201, X202, X203, X214, X807, X851, X852, X858,
20 pin CIS-contact block without pins. This connector must be sawn on
the required size for: X201, X202, X203, X214, X807, X851, X852,
Double 4 pin CIS-contact block (male header) X204, X501, X502, X651,
X867 (switch unit).
Double 7 pin CIS-contact block (male header) X213 (switch unit).
Contact pin, long type for bottom entry: X214, X851.
Contact pin, short type: all connectors except X214 and X851.