Advertisement
Introduction & description
This manual is intended to provide operation and service information
necessary for the safe and efficient use of the Floor Grinder.
Operating or servicing the unit other than in accordance with the instructions
given may subject the machine to conditions beyond its capability, which may
result in machine failure or personal injury.
IMPORTANT
Read the entire operating manual carefully before attempting to
use the floor grinder. Special attention should be paid to the
section entitled 'Safety Precautions'.
The Floor Grinder is a sturdy, reliable and easy to use machine.
The Floor Grinder is fitted with 2.2kW single phase motor. This motor offers a
direct drive to the grinding plate with the incorporation of a flexible coupling
between the motor and the plate.
The shroud system is unique in design, automatically adjusting to suit
segment height and floor angle. This shroud system, when used in
conjunction with an appropriate industrial vacuum unit, eliminates dust loss
during grinding. The shroud has 2 removable sections to enable the operator
to grind close up to the wall etc. Please note that dust loss is possible when
this section is removed.
The floor grinder comes complete with a water connection for wet grinding
should this be required. This incorporates a ball valve allowing the operator to
regulate the water supply to obtain the best grinding results.
The floor grinder has a foldable handle which enables it to be easily
transported in the trunk of most small vehicles. The rear wheels can also be
extended outward should the operator want more stability from the grinder.
This requires the use of a 10mm wrench. The operator can also raise or lower
the height of the handle to maximize their comfort when using the grinder. And
the new designed lifter system makes operator handy to use.
4
Advertisement
