Ingersoll-Rand TS8 Owner's Manual page 9

Kohler Gasoline Engine Battery (+) Positive cable connection
point
D
Honda Gasoline Engine Battery (+) Positive cable connection
point.
Yanmar Diesel Engine Battery (+) Positive cable connection
point.
22607402 Rev.J
RELEASED 03/Aug/2021 20:37:49 GMT
B
D
B
Refer to the engine manufacturer's instructions for more information.
B
B
Kohler Diesel (+) Positive cable connection point
NOTE: Circuit Fuse location at (D). Electric Start will not work if Fuse
is blown. Unit can be rope started, however will not charge battery
if Fuse is blown
2) Connect the battery negative (-) cable (C) to the bolt shown in
the following illustration. Secure the wire in place by screwing a
suitably-sized nut onto the bolt and down onto the terminal.
3) Connect the battery positive (+) cable (A) to the battery positive
(+) terminal.
4) Connect the battery negative (-) cable (C) to the battery negative
(-) terminal.
5) Coat the terminals and cable ends with corrosion-preventive
grease.
WARNING
Remove the cable from the negative (-) side of the battery
before servicing.
EN-9