Table of Contents
Advertisement
Items
Description
percentage which is set according
to the network link. You can
multiply this percentage value by
the encoder-encoded video and
audio total bitrates to get the
maximum overhead which is
allowed by the Bandwidth
overhead. This value plus the total
value of the video and audio
bitrates is the maximum value of
the current SRT transmission
bandwidth, which is the maximum
bandwidth of this SRT channel. The
purpose of the bandwidth
overhead is to transfer the control
message data packet which
accompany the SRT streaming.
Moreover, it also includes the
retransmission for all of the media
packets. If the network link
condition is worse, more
exchanges for the control message
data packets and more
retransmissions for the media data
packets will be needed. And you
need to set a higher Bandwidth
Overhead value.
SRT Stream ID Enable
This option allows you to turn on
or turn off the SRT Stream ID. The
Stream ID is an information which
can be exchanged between the SRT
Caller and the SRT Listener when
the SRT connection is established.
This Stream ID information allows
the SRT Listener to determine
whether the connection from a
certain SRT Caller should be
accepted or not.
72
Advertisement
Table of Contents
