Datavideo PTC-285TW Instruction Manual page 113

2. After that, you will see the Vmix main interface which is shown in the
following diagram.
3. At first, please go back to the PTC-285T web UI and then please click
"ON" from the "SRT" option.
4. Please select "Caller" from the "SRT Mode" drop-down menu.
5. Please enter the static IP address of your device which is used to install the
vmix software. In this example, it is the static IP address "192.168.100.30" of
the PC which is used to install the Vmix software. Please pay attention that
the static IP address of the device must be within the same LAN as the static IP
address of the PTC-285T.
6. The SRT port is "4578", which is the default SRT port number of the PTC-
285T.
113