Datavideo PTC-285TW Instruction Manual page 12

4k hdbaset tracking ptz camera
Table of Contents

Advertisement

4K HDMI OUT
3
The 4K HDMI OUT allows you to connect an external HDMI monitor via
an HDMI cable.
3G-SDI OUT
4
The 3G-SDI OUT allows you to connect an external monitor via an SDI
cable.
MIC IN/LINE IN
5
The 3.5mm audio input receives external audio.
RS-422 Interface (RJ-45)
The RS-422 interface serves to connect external RS-422 devices. Use an
6
Ethernet cable to connect external RS-422 controllers. See
Remote Control Port Pinouts"
interface.
IRID Interface
This interface allows users to use the DVIP Switch to control the
7
numbering of the camera on the remote controller. Users can use this
interface to set the camera to any number from No.1 to No. 4 in order
to use remote controller to control the camera.
HDBaseT/POE Interface
Connects the camera to the receiver box, thereby extending video
transmission up to 100m. Use a CAT5e/6 Ethernet cable to connect this
8
port to the HDBaseT port of the receiver box which in turn outputs the
HDMI video to an externally connected monitor. Moreover, this
interface can support the PoE (Power over Ethernet) technology.
for making the cable for the RS-422
12
"Section 17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptc-285t

Table of Contents