Related Manuals for Milwaukee MX FUEL MXF PC50
Summary of Contents for Milwaukee MX FUEL MXF PC50
- Page 1 OPERATOR'S MANUAL Cat. No. MXF PC50 MX FUEL™ PLATE COMPACTOR WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may R e a d a l l s a f e t y w a r n i n g s , WARNING result in personal injury. - Page 3 MILWAUKEE Tool or a ® that can make a connection from one terminal trained professional for additional information or to another.
-
Page 4: Functional Description
FUNCTIONAL DESCRIPTION Pinch hazard. Keep body parts away from hinge and lift point during folding and unfolding of the handle. Guaranteed Sound Power* Use lifting point. Do not lift with forks. Do not lift with excavator bucket. Lifting Weight** Regulatory Compliance Mark (RCM). This product meets applicable regulatory requirements. -
Page 5: Specifications
SPECIFICATIONS Cat. No..........MXF PC50 Battery Type ........MX FUEL™ Charger Type........MX FUEL™ Max Recommended Slope Operation ....25° Replacement belt........3VX250 Lifting weight..........102 kg** Recommended Ambient Operating Temperature ....-17°C to 51°C ASSEMBLY Recharge only with the charger WARNING specified for the battery. For specific charging instructions, read the operator’s manual supplied with your charger and battery. -
Page 6: Operation
When working in dusty situations, wear Unarm or remove battery to avoid starting the appropriate respiratory protection or use a machine. suitable dust extraction solution. Fold the handle in storage position. To hoist the machine, use the lifting point as the anchor point Wear protective footwear when operating the (see Functional Description). -
Page 7: Maintenance
Return the machine, 6. Remove the belt. battery pack, and charger to a MILWAUKEE service ® 7. Install a new belt in the "V" groove of both pulleys. - Page 8 ACCESSORIES 9. Tighten each motor mounting bolts using a calibrated device torque to around 29-30 Nm. This U s e o n l y r e c o m m e n d e d WARNING will help prevent the motor from sliding. accessories.
- Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...