Milwaukee MX FUEL MXF CVBP Operator's Manual

Milwaukee MX FUEL MXF CVBP Operator's Manual

Backpack concrete vibrator

Advertisement

Quick Links

OPERATOR'S MANUAL
Cat. No.
MXF CVBP
MX FUEL™ BACKPACK CONCRETE VIBRATOR
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents
loading

Summary of Contents for Milwaukee MX FUEL MXF CVBP

  • Page 1 OPERATOR'S MANUAL Cat. No. MXF CVBP MX FUEL™ BACKPACK CONCRETE VIBRATOR WARNING To reduce the risk of injury, user must read and understand operator's manual.
  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
  • Page 3: Specifications

    Maintain labels and nameplates. These carry • Recommended Ambient important information. unreadable Charging Temperature ...... 5°C to 40°C missing,contact a MILWAUKEE service facility ® MX FUEL Li-Ion Battery Packs ..... 72V DC for a replacement. Rated VPM ...........11,200 Some dust created by power sanding,...
  • Page 4: Functional Description

    Attaching the Flex Shaft FUNCTIONAL DESCRIPTION Flex shafts are normally lubricated from the manufacturer from one end. Attach the greased end to the machine. Use a flex shaft with a length suitable for the job. 1. Remove the battery pack. WARNING Always remove battery pack before changing or removing accessories.
  • Page 5: Operation

    Removing/Installing the Backpack Cold Start LED The backpack can be removed for certain applica- The Cold Start LED will illuminate when the tions or for spot cleaning. machine is started in cold conditions (below 0°C). The machine will will gradually bring the VPM up to To remove the backpack, squeeze the backpack 10,000 in order to avoid nuisance shut downs.
  • Page 6: Maintenance

    If the machine does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the machine still does not work properly, return the machine, charger and battery pack, to a MILWAUKEE service facility for repairs. ® ONE-KEY™...
  • Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

Table of Contents