Table of Contents
Advertisement
U
H
A.3
Personal protection equipment
Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the appliance's service life.
Stage
Transport
Handling
Unpacking
Installation
Normal use
Adjustments
Routine cleaning
Extraordinary
cleaning
Maintenance
Dismantling
Scrapping
Key:
●
PPE REQUIRED
○
PPE AVAILABLE OR TO BE USED IF NECESSARY
—
PPE NOT REQUIRED
1.
During these operations, gloves must be cut-resistant. Failure to use the personal protection equipment by operators, specialized personnel or users can involve
exposure to damage to health (depending on the model).
2.
During these operations, gloves must protect hands from the cold tray when being removed from the appliance. Failure to use the personal protection equipment
by operators, specialised personnel or users can involve exposure to chemical risk and cause possible damage to health (depending on the model).
3.
During these operations, gloves must be suitable for contact with chemical substances used (refer to the safety data sheet of the substances used for information
regarding the required PPE). Failure to use the personal protection equipment by operators, specialized personnel or users can involve exposure to chemical risk and
cause possible damage to health (depending on the model).
A.4
General safety
• The appliances are provided with electric and/or mechanical safety devices for protecting workers and the appliance itself.
• Never operate the appliance, removing, modifying or tampering with the guards, protection or safety devices.
• Do not make any modifications to the parts supplied with the appliance.
• Several illustrations in the manual show the appliance, or parts of it, without guards or with guards removed. This is purely for
explanatory purposes. Do not use the appliance without the guards or with the protection devices deactivated.
• Do not remove, tamper with or make illegible the marking and safety, danger and instruction signs and labels on the appliance.
• Before servicing, disconnect the electrical service and place a red tag at the disconnect switch to indicate work is being done on that
circuit.
• The A-weighted emission sound pressure level does not exceed 70 dB(A).
• Carefully avoid exposure of the equipment to ozone - do not use ozonizers in the rooms where the equipment is installed.
• The following operations have to be carried out by specialised authorised personnel or Customer Care Service provided with all the
appropriate personal protection equipment (A.3 Personal protection equipment), tools, utensils and ancillary means, who can ask the
manufacturer to supply a servicing manual:
– Installation and assembly;
1.
The noise emission values have been obtained according to EN ISO 11204. The value could increase depending on the workplace where measured.
10
North America range
R290 refrigerant fluid
Protective
Safety footwear
garments
●
—
●
—
●
—
●
—
●
●
○
●
○
●
○
●
○
●
○
●
○
●
ON
OFF
Gloves
Glasses
○
○
○
●
1
●
2
—
●
1
3
ˉ
●
1
3
ˉ
○
○
○
Disconnect the appliance from the power supply before carrying
out any installation, assembly, cleaning or maintenance
procedure.
1
Safety helmet
○
—
—
—
—
—
—
—
—
—
—
—
○
—
○
—
—
—
○
—
○
—
Advertisement
Table of Contents
