Replacing The Door Gasket - Electrolux 725449 Installation And Operating Manual

Thawing cabinet
Table of Contents

Advertisement

2.
3.
• Daily cleaning the cabinet
It is suggested to clean all internal parts and accessories after
each thawing cycle, or at least once a day. For cabinets with
internal drain it is possible to remove the cap during the
cleaning cycle. For cleaning proceed as follows:
1. remove the liquid collector basin, empty and clean it;
2. remove the grids supports and wash in a dishwasher;
3. clean the internal cell and interior door;
4. clean (if present) the inner door deflector;
CAUTION
Pay attention to not damage the inner
door deflector during the cleaning and
the ordinary use of the appliance.
5. accurately clean the door gasket and frame, in order to
avoid residual liquids from thawing;
a
b
6. thoroughly dry all surfaces;
7. once finished the cleaning cycle restore all accessories
inside the cabinet, including the drain cap;
After carrying out maintenance make sure the appliance is able
to work safely and, in particular, that the protection and safety
devices are efficient.
I.1.4
Periodically check the integrity status of the door gasket and
replace in case of broken. To replace the door gasket proceed as
follows:
a.
b.

Replacing the door gasket

4
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

725448

Table of Contents