Introduction; Machine Description - Husqvarna BLASTRAC EBE 350S Operating Instructions Manual

Before use, operators must be provided with information, instruction and training for the use of the machine
and the substances for which it is to be used, including the safe method of removal and disposal of the
material collected. All persons who are working with or maintaining this machine must read the manual
carefully and understand it fully. In case you sell the unit, hand it on to the next owner.
Keep this manual always with the machine, to enable it to be referred to at any time.
Any other work not covered by this operating manual must not be carried out.
This machine is designed for industrial use by professionals. Only authorized and trained personnel may
operate this machine. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge. We offer a course on the use of
the machine in order to make the operating and maintenance personnel familiar with all elements of the
machine.
The blast cleaning machine 350S is a downward blasting machine with a closed abrasive circuit exclusively
designed for the pre-treatment of dry, frost free horizontal surfaces. The bouncing impact of metallic abrasive
onto the surface to be treated thoroughly removes surface contaminants, coats of paint, sealants and thin
coatings. The intended use of this machine is blast cleaning of steel surfaces. The machine may not be used
for other purposes. The manufacturer will not be liable for damage resulting from incorrect usage, in these
cases the user assumes all risks.
A suitable filter unit must be connected to the machine in order to separate the dust from the abrasive. A
specially designed dust collection system ensures dust-free operation of the machine and clean air at the
workspace.
1 Fan unit
2 Separator door
3 Hydraulic motor
4 Separator

1. Introduction

2. Machine description

5 Separator tray
6 Hopper
7 Hydraulic tank
8 Recovery duct
9 Blast head, rubber sealing, brush sealing
10 Control box
11 Drive control handle
12 Blastwheel motor
13 Hydraulic drive
4