Table of Contents
Advertisement
Method of installing side seals:
WARNING! This operation requires a minimum of 2 persons.
1.
Park the product on level ground.
2.
Stop the product and let it become cool.
3.
1 person tips the product backwards on the floor.
4.
The second person puts a wooden block below the front wheel. The wooden block should measure
100×100×300 mm.
5.
While 1 person observes the process, the second person puts the side seal in the side seal box. Make
sure that the rounded part of the side seal points to the front of the product.
6.
Put the tool for the side seal around the side seal box to make sure that the side seals stays in the
correct position.
7.
Use the second tool for the side seal to install the side seal on the other side of the product.
8.
1 person holds the product in place while the second person removes the wooden block.
9.
Remove the 2 tools.
16
Advertisement
Table of Contents
