Table of Contents
Advertisement
1. Computer with videoconferencing software
The computer sends and receives audio to and from the videoconferencing software. All signals pass through the ANIUSB-
MATRIX's USB connection. Route Dante sources using Shure Designer or Dante Controller software.
Note: Compatible with Mac and PC
2. Analog input sources
Analog sources (such as wireless microphones or any line-level devices) connect to the analog line input.
3. Analog output devices
Loudspeakers, amplifiers, or recording devices connect to the analog line output.
4. Dante-enabled microphone
A Dante microphone (such as a Shure Microflex Advance array) connects to the network switch. Route the microphone's
signal to the ANIUSB-MATRIX, and then use the matrix mixer to route the signal to the USB output.
5. Control computer
A computer connected to the network accesses Shure Designer to control the channel levels and processing.
6. Network switch
Shure Incorporated
12/32
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ANIUSB-Matrix and is the answer not in the manual?
Questions and answers