Table of Contents
Advertisement
Programming
Exporting diagnostics to a USB flash drive
insert a USB memory drive and then tap
exporting of Diagnostics, tap the touchpoint
NOTE: The user must be logged in as either a lever 5 or 4 user to export panel history and diagnostic information.
3.3.9 Lamp Test
Tap the
touchpoint to turn on all pixels on the screen. This will illuminate the entire screen as well as the AC Power and Off Nor-
LAMP TEST
mal LED for approximately four seconds. During this time a tone will sound. A black spot on the screen will indicate that a pixel is out.
3.3.10 History
The history feature allows the user to view the panel history as well as the network history. History views may also be filtered.
Sorting and filtering
date under
DATE RANGE
text. To clear a search, tap the
to clear the field.
History will show, and can be filtered, for the follow-
ing:
This displays the entire history buffer,
All Events
regardless of event type. The history buffer can dis-
play up to a total of 10,000 events, including alarms.
This displays only the alarm events
Alarms Only
stored in the history buffer.
This displays only the trouble events
Troubles Only
stored in the history buffer.
Supervisory Only
sory events stored in the history buffer.
This displays only security and
Security/Other
events deemed "other" stored in the history buffer.
(i.e. Critical Process, Prealarm CO Alarm, etc.)
Time Date Interval
for the selection of a time period to define the range of
events displayed, as well as specific event type. (i.e.
All Events, Alarms Only, etc.)
This displays a screen to allow for the
Point Range
selection of a beginning and an end point that defines the range of events to be displayed.
Exporting History to USB Flash Drives:
USB flash drive and then tap
export.
NOTE: The user must be logged in as either a lever 5 or 4 user to export panel history and diagnostic information.
3.3.11 Cybersecurity History
Cybersecurity history events are stored in the panel history. A master level user is the only user level that can access Cybersecurity History.
Items logged in Cybersecurity history are as follows:
•
Signing file failed
•
Verify file signature failed
•
Verify file signature failed-file open
•
Verify file signature failed-start
•
Verify file signature failed-sign fail
•
N16 starting
•
N16 shutting down
•
N16 shutdown canceled
•
46
Tap on the
CONTINUE
CANCEL
Tap on the
touchpoint. A touchpoint for
FILTER
to search a specific date range. Type in a keyword in the
touchpoint. Tap on the
CLEAR
This displays only the supervi-
This displays a screen to allow
Tap on the
. The history will be exported onto the USB flash drive. Tap the
CONTINUE
touchpoint. A pop up box will appear prompting you to
EXPORT DIAGNOSTICS
. Diagnostics will be exported onto the USB memory drive. If the user wishes to cancel
.
and
SEARCH
EXCLUDE BACKGROUND ACTIVATIONS
System Normal
Menu - > Test/Diagnostics - > History
History
FIRE ALARM
SEARCH
Date range: between
CO ALARM
SUPERVISORY
Sun
TROUBLE
7
14
DISABLE
21
28
OTHER
4
SIGNALS
SILENCED
Figure 11 History Search Screen
touchpoint. A pop-up box will appear prompting the user to insert a
EXPORT HISTORY
N16 Instruction Manual P/N LS10239-000NF-E:A 04/20/2021
User Programming Options From the FACP
will appear along with a virtual keyboard. Enter a
CLEAR
section to search the history for particular
CONTAINS TEXT
check box to select that feature. Tap again
Ack
CLEAR
MM/dd/yyyy
and MM/dd/yyyy
July
2020
Wed
Mon
Tue
3
1
2
8
9
10
17
15
16
23
22
24
29
30
31
5
6
7
CANCEL T
Tue 11/03/20
02:38:06PM
Master
Silence
Reset
Thu
Sat
Fri
5
4
6
11
12
13
20
18
19
25
26
27
1
2
8
9
10
ouchpoint to cancel history
Advertisement
Table of Contents
