Hardware Installation - HighPoint SSD7000 Gen4 Series Quick Installation Manual
8x m.2 port to pcie 4.0 x16 nvme raid controller
Hide thumbs
Also See for SSD7000 Gen4 Series:
- Installation manual (19 pages) ,
- Installation manual (19 pages)
Advertisement
Hardware Installation
Step 1. Apply pressure to release the lock, turn it counterclockwise, and
remove the tray.
Warning:
carefully to avoid causing damage to the fan module.
Step 2. Loose the screw and remove the film.
Step 3. Gently insert the NVMe SSD into the Tray.
Note:
Ensure the NVMe SSD contacts ("golden fingers") are
clean before installation.
Please pay attention to opening the fan module
5
Advertisement
