Table of Contents
Advertisement
Payment system
The XCI-AD or XCI box accessory unit
is required to connect a payment sys-
tem.
Setting for payment systems
If you wish to change the settings after
the commissioning process, please con-
tact Miele Service.
You would like to connect a payment
system.
- No payment system
The next settings are skipped and ini-
tial commissioning can be completed.
- Programme operation
The machine is operated using a coin
box. The user purchases a wash pro-
gramme.
- Timed operation
The tumble dryer is coin-operated us-
ing a time meter. The user purchases
a time-controlled programme.
- Timed operation with pulse counter
For payment systems where the us-
age time is increased each time a
coin is inserted.
Supervisor level
Feedback signal to pay system
Setting the feedback signal for the coin
box.
- Factory default: Off
- End of programme
The feedback signal is sent at the end
of the programme.
- Release of the start button
The feedback signal is sent when the
start button is released.
- Start and end of programme
The feedback signal is sent at the
start and end of the programme.
- Programme running
The feedback signal is sent constantly
between the start and end of the pro-
gramme.
- Process air temperature
The feedback signal is sent depend-
ent on the temperature if the temper-
ature of the process air is equal to or
higher than the set temperature.
89
Advertisement
Table of Contents
