Table of Contents
Advertisement
Problem solving guide
Message
Clean the fluff filter
and rinse the plinth
lights up at
filter.
the end of a pro-
gramme.
Rinse the fluff filter
and the plinth filter.
Check the airways.
lights up after a
programme has
been cancelled.
58
Cause and remedy
The tumble dryer is not working correctly or econom-
ically. Possible causes could be clogging caused by
fluff or detergent residue.
Normally, all you have to do is clean the fluff filter.
Also check the plinth filter and clean it if necessary.
If you have removed the plinth filter, also check the
filter insert behind it. Clean it if necessary.
Please see "Cleaning and care" for notes on cleaning.
To delete the message: touch the
trol.
You have attempted to dry only a few items of varying
size. A smaller item has been sucked into the loading
area in the door and is clogging the holes in the laun-
dry deflector.
To delete the message: touch the
trol.
Open the tumble dryer door.
Remove the item that is blocking the holes.
Always dry small, individual items together with
larger items.
If you are able to exclude all this, an even more major
problem has occurred. See below.
The system has been clogged by fluff or detergent
residue.
Clean all lint filters and air channels.
Check whether the fluff filters in the loading area
and plinth are free from damage and in good work-
ing order.
If you have removed the plinth filter, also check the
filter insert behind it. Clean it if necessary.
If you have removed the filter insert, also check the
heat exchanger behind it. Clean it if necessary.
Please see "Cleaning and care" for notes on cleaning.
Damaged, deformed or uncleanable fluff filters must
be replaced.
To delete the message: touch the
trol.
sensor con-
OK
sensor con-
OK
sensor con-
OK
Advertisement
Table of Contents
