Hisense HEC5C60WD Instructions For Use Manual page 4

WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of
electric shock.
WARNING: Before replacing the light bulb, make sure the appliance has been
disconnected from the mains power, in order to prevent the hazard of an electric shock.
Appliance must not be installed behind a decorative door in order to avoid overheating.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass/
the glass of hinged lids of the hob (as appropriate), since they can scratch the surface,
which may result in shattering of the glass.
Do not use steam cleaners or high-pressure cleaners to clean the appliance, as this may
result in an electric shock.
The appliance is not intended to be controlled by external timers or separate remote control
system.
WARNING: Use only hob guards designed by the manufacturer of the cooking appliance
or indicated by the manufacturer of the appliance in the instructions for use as suitable or
hob guards incorporated in the appliance. The use of inappropriate guards can cause
accidents.
Make sure the lid is clean and that there is no liquid spilt on it before raising it. The lid may
be lacquer-coated or glass. It may only be closed when the cooking zones have completely
cooled down.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
CAUTION: This appliance is for cooking purposes only. It must not be used for other
purposes, for example room heating.
The appliance is intended to be placed directly on the floor, without any supports or plinths.
Do not install the appliance near powerful sources of heat, such as solid fuel stoves,
because high temperature near them can damage the appliance.
The appliance may only be connected to the mains power by an authorized service
technician or expert. Clamps (instead of connecting cable) should be protected by a clamp
cover (see additional equipment). Tampering with the appliance or non-professional repair
thereof may result in risk of severe injury or damage to the product.
Cooker with stainless steel control panel and electrical oven is equipped with a cooling fan.
During operation of the oven, air flows from the cooker in the area under the control panel
when door is closed. If there is no air flow switch off the appliance and contact service.
If the power cords of other appliances located near this appliance are caught in the oven
door, they may be damaged, which may in turn result in a short circuit. Therefore, keep the
power cords of other appliances at a safe distance.
3