Hisense HEC5C60WD Instructions For Use Manual page 20

LEVELLING THE APPLIANCE AND ADDITIONAL SUPPORT
The height of the cooker is 850 mm. You can adjust the height of the appliance from 850 to 865 mm.
ADJUSTING THE HEIGHT OF THE COOKER
The height of the cooker is 900 mm. You can adjust the height of the appliance from 850 to 940 mm.
• Put the cooker on the floor with back side.
• Unscrew the screws, see arrows.
The cooker must be installed horizontally!
(depending on the model)
Torx T20
Follow these steps:
• Rotate the height adjustment screws (see figure 1) to adjust
• Adjust the wheels (see figure 2) by screwing them with two
• Place the blind plugs into the holes in the front of the skirting
(depending on the model)
• Set the desired height.
• Screw the screws back together
the height of the cooker to the correct position.
screws at the front of the skirting board. Check the horizontal
position of the stove using a spirit level.
board (see Figure 3).
19