Figure 28 Syslog & Monitor; Table 24 Syslog & Monitor - ZyXEL Communications NXC-8160 User Manual

Figure 28 Syslog & Monitor
The following table describes the labels in this screen.
Table 24 Syslog & Monitor
LABEL
Enable Syslog
Syslog Server IP
Address
Syslog Interval (sec)
Enable Monitor
Monitor Server IP
address
Monitor Interval (sec)
Save
Reset
NXC-8160 User's Guide
DESCRIPTION
Select the check box to activate syslog logging.
Syslog logging sends a system log to an external syslog server.
Enter the server name or IP address of the syslog server.
Specify the time interval in seconds (from 1 to 99999) at which the NXC-8160
sends the system logs to the server.
Select the check box to send wireless network status logs to an external
server.
Enter the server name or IP address of the monitor server.
Specify the time interval in seconds (from 1 to 99999) at which the NXC-8160
sends the wireless network status logs to the server.
Click Save to save your changes back to the NXC-8160.
Click Reset to begin configuring this screen afresh.
Chapter 8 Maintenance Screen
71