Access Points Screen; Figure 26 Access Points; Table 22 Access Points - ZyXEL Communications NXC-8160 User Manual

C
H A P T E R
Click Access Points to display the screen as shown. This screen allows you to view the status
of the access points (APs) connected to the NXC-8160. You can also use this screen to set the
NXC-8160 not to supply power to an AP.

Figure 26 Access Points

The following table describes the labels in this screen.

Table 22 Access Points

LABEL
Active Access
Points
Power-On APs
Apply
Reset
NXC-8160 User's Guide

Access Points Screen

DESCRIPTION
This field is grayed out and shows whether an access point connected to the WLAN
port is active (selected) or not (cleared). By default, an AP receives power from the
NXC-8160 and is activated automatically when it is connected to the NXC-8160.
The check boxes correspond to the WLAN ports on the front panel of the NXC-
8160.
Select a check box to have the NXC-8160 supply power to the AP connected to this
port. Otherwise, clear the check box and the NXC-8160 stops supplying power to
the AP connected to this port after you click Apply.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
7
67