Chapter 6 Advanced Screen
Table 21 Advanced
LABEL
Save
Reset
SNMP
Enable Traps
Community
Destination
Save
Reset
66
DESCRIPTION
Click Save to save your customized settings in this section.
Click Reset to begin configuring this section of the screen afresh.
Select the check box to enable sending of SNMP traps to a station.
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
Click Save to save your customized settings in this section.
Click Reset to begin configuring this section of the screen afresh.
NXC-8160 User's Guide