Making A Call - Sony ULT WEAR Quick Start Manual

Help Guide
Wireless Noise Canceling Stereo Headset
ULT WEAR

Making a call

You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via a Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you
try to operate them with the headset.
Connect the headset to a smartphone or mobile phone via a Bluetooth connection.
1
Operate your smartphone or mobile phone to make a call.
2
When you make a call, the dial tone is heard from the headset.
If you make a call during music playback, playback pauses.
Use your smartphone or mobile phone to transfer the call to the headset.
The headset has omnidirectional microphones. You can talk without worrying about the position of the microphone.
Adjust the volume using the touch sensor control panel.
3
Increase the volume: Swipe up repeatedly until the volume reaches the desired level.
Lower the volume: Swipe down repeatedly until the volume reaches the desired level.
Change the volume continuously: Swipe up or down and hold. Release at the desired volume level.
When the volume reaches the maximum or minimum, an alarm sounds.
When you finish your phone call, tap the touch sensor control panel twice quickly (with an interval of about
4
0.4 seconds) to end the call.
95