Sony ULT WEAR Quick Start Manual page 2

Press and hold the
The headset enters pairing mode automatically when you turn on the headset for the first time after
purchase.
Establishing a BLUETOOTH® connection
Follow the downloaded "Sony | Headphones Connect" app instructions.
Operating the headset
You can use the touch sensor control panel to perform the following operations.
Tap twice quickly: Play/Pause
Swipe forward and release: Skip to the beginning of the next track
Swipe backward and release: Skip to the beginning of the previous track (or the current track
during playback)
Swipe up and release: Increase the volume
Swipe down and release: Lower the volume
For more details on operations, refer to "Controlling the audio device (Bluetooth connection)".
To prevent burning or malfunction due to getting wet
The headset is not waterproof.
If the headset is charged while it is wet with rain or sweat, etc., this can result in burnout or malfunction.
Note
If you put on the headset without adjusting the slider, the headset may not be positioned properly on your head, resulting in
discomfort or a weak noise canceling effect. The wearing detection function of the headset may also not work properly and cause
music playback to stop automatically or activate the automatic power off function (the battery saving function) to automatically turn
off the headset.
Related information
Wearing the headset
Establishing a Bluetooth connection manually
Charging the headset
WH-ULT900N
Getting started
What you can do with the Bluetooth function
About the voice guidance
Supplied accessories
Included items
(power) button for about 2 seconds or more until the indicator (blue) flashes.
2