Sony ULT WEAR Quick Start Manual page 137

Help Guide
Wireless Noise Canceling Stereo Headset
ULT WEAR
The headset reacts incorrectly.
When connected with the computer, depending on the computer application you are using, music playback may not
stop even if you remove the headset, but this is not a malfunction. Operate with the computer application to stop the
music playback.
If the operation of the headset changes unintentionally, for example, ambient sound is heard suddenly, check the
setting of [Ambient Sound Control] with the "Sony | Headphones Connect" app. If it is set to [Ambient Sound], the
effect of noise canceling is reduced. Set it to the noise canceling mode.
The sensor of the touch sensor control panel (A) is built into the flat surface of the right unit. Operate within the range
of the sensor.
When you swipe your finger forward/backward or up/down on the touch sensor control panel, the touch sensor control
panel may not work correctly depending on the angle at which the headset is worn or the direction your head is
facing.
When you swipe your finger forward/backward, make the movements perpendicular to the headband.
When you swipe your finger up/down, make the movements parallel to the headband.
Note
While the headset is connected to a device via the supplied headphone cable and the headset is turned on, you can use Quick
Attention Mode, but you cannot perform operations such as volume adjustment or play/pause.
137