Table of Contents
Advertisement
The connection is established.
You will hear a notification sound indicating that the connection is established.
On the [Recording] tab, select [ULT WEAR], right-click it, and select [Connect] from the displayed menu.
7
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the computer.
Note
If the music playback sound quality is poor, check that the A2DP function which supports music playback connections is enabled
in the computer settings. For more details, refer to the operating instructions supplied with the computer.
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
57
Advertisement
Table of Contents
