Table of Contents
Advertisement
Report
It Provides three CSV (Comma Separated Values) format reports. These reports can be downloaded and viewed with CSV supported
tools like Microsoft Excel.
•
System Information Report: This report contains information shown in the System Info function.
•
Health Information Log Report: This report includes the historical data of monitored item readings. Readings of selected (i.e.
enabled) monitored items will be written to a file only if the Polling Interval value is set and the Log option is enabled in the
Alert Configuration function.
•
Event Log Report: This report contains events that represent problems and recoveries with monitored items. When the status
of a monitored item is changed, an event log is written to the Event Log Report. Note that to write events to the log file, the
Polling Interval on the Configuration page must be set.
IPMI LAN Management
A Dedicated IPMI LAN Port is located on the back panel of the RS9 Server, that accepts RJ45 Cable.
It allows a system administrator to monitor system health and manage computer events remotely.
Configuring BIOS
For the IPMI to work properly, please enable all onboard USB ports and the COM port designated for SOL (IPMI) on the motherboard. All
USB ports and the COM port for IPMI (marked with "*") are enabled in the system UEFI BIOS by default. It is usually listed as COM2 or
COM3 in the UEFI BIOS.
The default network setting is "Failover", which will allow the IPMI to connect to the network through a shared LAN port (onboard LAN
Port 1 or 0) or through the IPMI Dedicated LAN Port. If the IPMI must be connected through a specific port, please change the LAN
configuration setting under the Network Settings.
To verify and Configure follow the below steps
1.
During the system bootup, press the <Del> Key to Enter the UEFI BIOS
2.
During the system bootup, press the <Del> key to enter the UEFI BIOS.
3.
Select the IPMI tab.
4.
Select BMC Network Configuration and press <Enter>.
5.
Highlight Update IPMI LAN Configuration, press <Enter> and select [Yes].
25 – RS9 User Guide
Europe – Americas – Middle East |
IPMI Dedicated LAN
sales@fibrenetix.com
| www.fibrenetix.com
Advertisement
Table of Contents
