Table of Contents
Advertisement
E-mail Alert
User can send alert via email by configuring the SMTP
click on the "System Controls" link
•
Move the cursor bar to the "Alert By Mail Configuration" item
•
then select the desired function
•
The firmware contains a SMTP manager monitoring all system events
•
Single or multiple user notifications can be sent via "Plain English" e-mails
•
SNMP Configuration
To configure the RAID subsystem's SNMP function, select System Controls > SNMP configuration.
The firmware contains SNMP agent manager monitors all system events and user can use the SNMP function from the web settings.
This function can only set by the web-based configuration
•
Enter the SNMP Trap Address
•
Community name acts as a password to screen accesses to the SNMP agent. Enter community names of the SNMP agent.
Before access is granted, this station must incorporate a valid community name into its request; otherwise, the SNMP agent
will deny access to the system. Most network use "public" as default community names.
18 – RS9 User Guide
Europe – Americas – Middle East |
sales@fibrenetix.com
| www.fibrenetix.com
Advertisement
Table of Contents
