Table of Contents
Advertisement
Raid Controller management Access via LAN
To remotely access the raid control management via LAN network, we need to setup the Ethernet configuration IP addresses. This
webpage will be accessible on the remote servers on the LAN within the same IP subnet.
Fibrenetix RS9 Server Administration
The Fibrenetix RS9 Server management administration using Super Doctor (SD5) helps the user the monitoring, control, and
management functions. It helps the Hardware Monitoring: fan speed, temperature, voltage, chassis intrusion, redundant power failure,
power consumption, disk health, raid health, and memory health also Provides SNMP extensions for network management system.
SD5 contains an SNMP extension module that should be plugged in into the Microsoft Windows SNMP service. Users can therefore
query the readings of monitored items via SNMP.
Note: To install the SNMP extension, the Microsoft Windows SNMP service must be installed first.
Configuring SNMP Services on Windows Server
1.
Open Server Manager, Add roles and features and proceed installation until you reach the Features page. Check the
Service
in the list of features.
19 – RS9 User Guide
Europe – Americas – Middle East |
sales@fibrenetix.com
| www.fibrenetix.com
RAID Controller Management Port
SNMP
Advertisement
Table of Contents
