Fan Replacement; Power Suppy Unit Psu Replacement - Fibrenetix RS9 Series User Manual

FAN replacement

• Identify the faulty fan before the replacement.
• RS9 Fans are easy to remove and replace.
• Lift the fan from the FAN cage to remove.
• Remove and replace the FAN connector from the Faulty FAN to the new FAN.
• Align and Insert the replacement fan to the fan cage gently.
• The airflow directional arrow on the fan side should point towards the system rear panel.
• Do not forget to close the enclosure cover properly before starting the machine.

Power Suppy Unit PSU replacement

• Identify the faulty PSU before the replacement.
• Disconnect the power cable connected to the faulty PSU.
• Push the nob and pull the PSUs carefully.
• Insert the replacement PSU to the slot and connect the power cable.
12 – RS9 User Guide
Europe – Americas – Middle East | sales@fibrenetix.com | www.fibrenetix.com