Creating a volume set
To create a Volume based upon the newly created RAIDSET – go to the Volume menu on the left.
Configuring the Volume set
The volume set can be configured as follows as Fibrenetix standard:
15 – RS9 User Guide
Europe – Americas – Middle East |
sales@fibrenetix.com
| www.fibrenetix.com
Volume Name:
Desired Volume Name can be given; example: FibreX-Vol-#001
Supported RAID levels are Listed in the drop-down menu; example:
Greater than 2TB Volume Support: 64Bit LBA
Default Value is 64Bit LBA, drop down list shows all the options.
Select the 'Confirm the Operation' and click 'Submit' when done