Troubleshooting - Southbend PLATINUM Series Installation & Operation Manual

Gas convection ovens

Hide thumbs Also See for PLATINUM Series:

ROUBLESHOOTING

ADJUSTMENTS AND SERVICE WORK MAY BE PERFORMED ONLY BY A QUALIFIED TECHNICIAN WHO IS

EXPERIENCED IN, AND KNOWLEDGEABLE WITH, THE OPERATION OF COMMERCIAL COOKING EQUIPMENT.

HOWEVER, TO ASSURE YOUR CONFIDENCE, CONTACT YOUR AUTHORIZED SERVICE AGENCY FOR RELIABLE

SERVICE, DEPENDABLE ADVICE, GENUINE FACTORY PARTS AND ANY OTHER ASSISTANCE.

The warranty will be void and the manufacturer is relieved of all liability if service work is performed by other than a

qualified technician, or if other than genuine Southbend replacement parts are installed.

In case of problems in operation at initial installation, check type of gas and manifold pressure and compare with

information listed on the serial plate. The serial plate is located inside the lower front panel.

ERFORMANCE

The typical time for the oven to heat from 75 °F to 350 °F is 5 to 6 minutes for ovens using natural gas, and 7 to 8 minutes

for ovens using propane depending with the model.

The burners should come on when the actual oven temperature drops to 10 °F below the temperature setting.

PAGE 44 OF 54

TANDARD

INSTALLATION AND OPERATION MANUAL 1409003 REV 0 (02/24)

PLATINUM SERIES GAS CONVECTION OVEN

WARNING

NOTICE

Table of Contents