Appendix 1: Hazard Groups - Xylem Jabsco PUREFLO 21 Operation Manual

Appendix 1: Hazard groups

Mechanical hazards
- Crushing
Hazard location / operation phase
Assembly and installation of the pump head in the
drive unit
Operation of the drive unit
Maintenance of the drive unit
Assembly and installation of the drive unit on the
motor
- Shear
Hazard location / operation phase
Assembly and installation of the pump head in the
drive unit
- Cutting
Hazard location / operation phase
Assembly and installation of the pump head
Disassembly of the pump head
Assembly and installation of the pump head in the
drive unit
- Grasping
Hazard location / operation phase
Operation of the drive unit
- Pulling in
Hazard location / operation phase
Operation of the drive unit
- Abrasions
Hazard location / operation phase
Assembly and installation of the pump head
Disassembly of the pump head
Assembly and installation of the pump head in the
drive unit
Operation of the drive unit
Maintenance of the drive unit
- Intrusion of liquids under pressure
Hazard location / operation phase
Operation of the pump head
Jabsco
PUREFLO 21 Single Use
Innovative Systems GmbH
Description of hazard
Crushing may occur when mounting the pump head
into the drive unit
Risk of crushing due to fingers engaging in the drive
unit without inserted pump head
Risk of crushing fingers during maintenance of the
drive unit components
Risk of crushing the fingers or hand when mounting
the drive unit on the motor
Description of hazard
Injury of fingers from mounting the pump head in the
drive unit
Description of hazard
Cuts by sharp edges at the pump head
Cuts by sharp edges at the pump head
Possibility of cutting and severing fingers during im-
proper installation of the pump head into the drive unit
Description of hazard
Risk of fingers being caught by a rotating centering
disk due to incorrect use or operation without the
pump head mounted
Description of hazard
Risk of work gloves worn being pulled in by a rotating
centering disk due to incorrect use or operation with-
out the pump head mounted
Description of hazard
Rough surfaces and sharp edges of the pump head
can cause abrasions during installation
Rough surfaces and sharp edges of the pump head
can cause abrasions during installation
Slippage during assembly of the pump head into the
drive unit, which can cause abrasions
Risk of abrasions from a rotating centering disk if
used incorrectly
Abrasions on fingers and hand due to improper
maintenance of the components
Description of hazard
Liquids may enter the space through leaks
Operation Manual
V