10.10 Settings For Ease of Use
Use this menu to configure settings that control the DMA's operation.
Select OPTION > Settings for Ease of Use to open the following menu.
Figure 46 OPTION > Settings for Ease of Use
The following table describes the fields in this menu.
Table 18 OPTION > Settings for Ease of Use
LABEL
Connect to last
accessed server
automatically
Connect to single
server/USB
automatically
Resume last
screen from
standby
Sound effect
OK
CANCEL
10.11 Reset Settings
Use this menu to set the DMA back to the factory default settings.
DMA-1100P User's Guide
DESCRIPTION
When the DMA starts up, this option has it automatically connect to the media
server that you last used.
A check mark appears next to the option if it is selected.
When the DMA starts up, this option has it automatically connect to the media
server or USB device that you last used.
A check mark appears next to the option if it is selected.
If you were playing a file when you turned off the DMA, this option has the DMA
automatically continue playback from where you left off when you turn the DMA
back on.
A check mark appears next to the option if it is selected.
Set how loud you want the DMA to beep when you press buttons on the remote
control.
Select this to save your changes back to the DMA.
Select this to exit this screen without saving your changes.
Chapter 10 Configuring the DMA
75