ZyXEL Communications DMA-1100P User Manual page 90

Chapter 13 Troubleshooting
Some of my photo files do not display thumbnails.
Some files do not support thumbnails and thus will not display them.
I cannot see the files on my USB device.
1 Make sure you have the USB device properly connected to the USB port. See the Quick
Start Guide for details.
2 Files with unsupported formats or codecs may not play or may not play properly. See
Section on page 99
3 Turn the DMA off and on using the power switch on the rear panel (instead of the Power
button on the remote control)
4 Try using a different USB stick.
The A-B function does not work on some files.
Some files do not have time tags and cannot support the A-B function.
My favorites settings were not saved.
After adding to or editing a favorites list, press the remote's Power button to make the DMA
enter standby mode to save your change. Then press the Power button again to return to
operation mode.
I connected the DMA to two televisions but it only displays on one.
The DMA only provides output through one connection at a time (either the HDMI connection
or the S-Video connection). Not both at the same time.
The DMA menu display does not fill my television screen.
Check the DMA's video output settings (see
90
for details on the supported file formats and codecs.
Section 10.7 on page 71).
DMA-1100P User's Guide