Video Modes; Tv Settings; Figure 43 Option > Tv Settings; Table 15 Option > Tv Settings - ZyXEL Communications DMA-1100P User Manual

10.6 Video Modes

The DMA supports 480i, 480p, 720p and 1080i video modes. 720p and 1080i are high
definition television modes. 480i is used with most standard definition televisions. The
number ("1080" for instance) stands for the number of lines of vertical resolution. The letter
"i" stands for interlaced scan. The letter "p" stands for progressive scan. Progressive scan
provides higher picture quality than interlaced but requires twice the bandwidth.

10.7 TV Settings

Use this menu to configure the video output that the DMA sends to your television.
Select OPTION > TV Settings to open the following menu.
Figure 43 OPTION > TV Settings
The following table describes the fields in this menu.
Table 15 OPTION > TV Settings
LABEL
Output Type
Screen Size
Resolution
OK
CANCEL
DMA-1100P User's Guide
DESCRIPTION
Select Digital if your television accepts digital input.
Select Analog if your television only accepts analog input.
Select 16:9 if your television supports the 16:9 format (widescreen).
Select 4:3 if your television supports the 4:3 format (traditional television).
Select a video mode. Use the highest number that your television supports.
Select from 480i, 480p, 720p and 1080i.
You can also select Auto when the Output Type is set to Digital.
Select this to save your changes back to the DMA.
Select this to exit this screen without saving your changes.
Chapter 10 Configuring the DMA
71