4 Then change Network name the Go to OPTION > Powerline on your DMA's onscreen
menu. The screen shown below displays.
5 Click OK with your remote control when the Network name field is highlighted, as
shown in the screen below.
Figure 38 Option > Homeplug Settings: NMK Setup
6 The Keyboard Input screen appears. See
to use this screen.
7 Enter the same Network name that you set on your computer's powerline adapter.
Figure 39 OPTION > Homeplug Settings: Keyboard Input
DMA-1100P User's Guide
Chapter 10 Configuring the DMA
Figure 10 on page 36
for instructions on how
67