Access Point Mode; Changing G-220 V2 Mode; Figure 3 Application: Access Point Mode; Figure 4 Zyxel Utility: Change Modes - ZyXEL Communications G-220 v2 User Manual

1.2.3 Access Point Mode

You can also set the G-220 v2 to access point mode. In access point mode, your G-220 v2
functions as an access point. This allows you to set up your wireless networks without using a
dedicated AP. The following figure shows a network example.

Figure 3 Application: Access Point Mode

In the example, the G-220 v2 is installed on computer A and set to operate in access point
mode. Computer A provides an Internet connection to the wireless LAN, so wireless stations
B and C can access the Internet.

1.2.4 Changing G-220 v2 Mode

To change between the modes, select either Station Mode or AP Mode in any ZyXEL utility
screens.

Figure 4 ZyXEL Utility: Change Modes

Note: Wait for about five seconds for the ZyXEL utility to complete the mode change.
The current mode is indicated by the color of the check box.
Chapter 1 Getting Started
ZyXEL G-220 v2 User's Guide
23