Pci-Express Slot - JETWAY 754GT7-SLI-G User Manual

IMPORTANT! If using PCI cards on shared slots, make sure that the drivers support
"Shared IRQ" or that the cards don't need IRQ assignments. Conflicts will
arise between the two PCI groups that will make the system unstable or
cards inoperable.
2-5-4 PCI Express Slot
This motherboard provides three 16-lane PCI Express slot intended for Graphics Attach(Two
symmetrical PCI-Express x16 graphics slots in different color with other slots deliver up to
2Gbyte/sec data transfer rate at each relative direction which is fully compatible with the
latest NVIDIA SLI Technology. One PCI-Express x16 graphics slot offers 4Gbyte/sec data
transfer rate at each relative direction.), and one x1 PCI Express Slot. Fully compliant to the
PCI Express Base Specification revision 1.0a , support PCI Express VGA card, and other PCI
Express device.
IMPORTANT!
The SLI Technology supports only nForce4 SLI chipset based
motherboard only. The modification for chipset is not an option for end
users. Or you may get no warranty for the motherboard you purchased.
Please make sure the major display output is out from the NVIDIA SLI Supported VGA
Card installed in the 2
the SLI technology with one pair NVIDIA SLI Supported VGA Cards . And install the
single PCI EXPRESS x16 interface supported VGA card to get the full speed of x16
bandwidth in the PCI EXPRESS x16 slot in light yellow as being marked above.
SLI VGA Signal Output
nd
PCI EXPRESS x8 for SLI slot in light green while activating
13
PCI-E x1 Slot
st
1 PCI-E x8 for SLI
PCI-E x16 for full bandwidth
nd
2 PCI-E x8 for SLI