Vaderstad 2320466407 Assembly Manual
  1. Manuals
  2. Brands
  3. Vaderstad Manuals
  4. Farm Equipment
  5. 2320466407
  6. Assembly manual

Vaderstad 2320466407 Assembly Manual

3 section fieldcultivator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Manuals
Assembly
3 Section Field Cultivator
SN 2320466407-
4000361191 / APR 2024

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2320466407 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vaderstad 2320466407

Summary of Contents for Vaderstad 2320466407

  • Page 1 Manuals Assembly 3 Section Field Cultivator SN 2320466407- 4000361191 / APR 2024...
  • Page 2 New Equipment Warranty - Equipment is eligible for warranty service only if it qualifies under the provisions of the New Equipment Warranty. The selling dealer will deliver this Warranty to the original retail purchaser at the time of sale, and the dealer will register the sale and Warranty with Vaderstad Inc.

  • Page 3: Safety Signs

    Introduc on Safety Alerty Symbol This is the safety alert symbol. The safety alert symbol will direct the operator’s attention to information that involves personal safety and the safety of others. Safety Messages The words DANGER, WARNING, or CAUTION are used with the safety alert symbol. Learn to recognize these safety alerts and follow the recommended precautions and safety practices.

  • Page 4: A Word To The Operator

    Introduc on (Cont’d) A Word to The Operator It is the operator’s responsibility to read and understand the safety sec on in this manual and the manual for all a achments before opera ng this machine. Study the features in this manual and make them a working part of a safety program.
  • Page 5 Opera on Prepare For Opera on Read and understand all opera ng instruc ons and precau ons in this manual before opera ng or servicing the machine. Know and understand the posi ons and opera ons of all controls. Make certain all controls are in neutral and the park- ing brake is applied before star ng the machine.

  • Page 6: Traveling On Public Roads

    Operation (Cont’d) Traveling On Public Roads Machine was designed for apply chemicals and fer lizers in off -road use. Do not use the machine for transpor ng product on public roads. Chemical spills result in environmental damage. A loaded machine driven on public roads also runs a high risk of re failure. Personal injury could result. Always walk around and visually inspect the machine before traveling on public roads.
  • Page 7 High Pressure Leaks Fluid leaking from the hydraulic system or the fuel injec on system under high pressure can be very hard to see. The fl uid can go into the skin causing serious injury. Fluid injected into the skin must be surgically removed within a few hours. If not removed immediately, serious infec on or reac on can develop.
  • Page 8 Replacement Parts Where replacement parts are necessary for periodic maintenance and servicing, genuine replacement parts must be used to restore your equipment to original specifi ca ons. The manufacturer will not accept responsibility for installa on of unapproved parts and / or accessories and damages as a result of their usage.
  • Page 9 Unbundling Unbundling Field Cultivator 1. Remove packing materials. 2. Use two crane/hoists with slings to secure the frame assemblies and prevent tipping. 3. Remove all packing materials. Cut and remove all banding. 4. Move the wing rests to the side for later installa- tion.
  • Page 10 Unfold and Connect the Main Frame and Wing Sections Preparation Position Rear Supports 1. Position two cranes/hoists in the work area to move heavy parts for assembly. 2. Find hardware in the bundled box labeled C40A. Rotate Sections Down 1. Remove the nuts and brackets attaching the four shipping stands to the rear of the main frame and wings.
  • Page 11 Attach Wheel Assemblies to Hub and Spindle Assemblies Preparation Left Wing 1. Position a crane/hoist in the work area to move heavy parts for assembly. Main Frame 1. Remove the nuts from the bolts on the two hub and spindle assemblies. 1.
  • Page 12 Right Wing 1. Remove the nuts from the bolts on the two hub and spindle assemblies. 2. Loosen the nuts in the axle clamp assembly to allow the right wing axle to rotate. 3. Use a safe lifting device to position the axle leg- subweld as needed to attach each wheel assembly.
  • Page 13 Connect the Sections 1. Loosen the ten bolts in the hinge plates joining the main wings with the front wings and joining the main frame with the front frame to allow the sec- tions to rotate. 2. Using two cranes/hoists, attach a pair of slings where the front main frame joins with each front wing.
  • Page 14 WING REST ASSEMBLY STEP 9: Retrieve wing rest removed from upright shipping confi gurations in step 2. Remove hardware connecting both wing rests together.
  • Page 15 REAR WING REST ASSEMBLY STEP 10: Use four each of the following parts (1) 3/4“x 2 grade 8 bolts, (2) 3/4” lock washer, and (3) 3/4 “nuts to secure (4) wing rest to main frame. The wing rest must be placed behind truss anchors and center mounts must be in front of anchor straps as shown.
  • Page 16 FRONT WING REST ASSEMBLY Note: Install (2) 88369 nuts with (2) 88630 washers.
  • Page 17 WING MOUNTING PLATE STEP 12 (11' 8" wings only): Attach plates (1) using a total of eight of each of the following parts: (2) 5/8: x 1-3/4” grade 5 bolt, (3) 5/8” lock washer, and (4) 5/8” grade 5 nut. Do the same steps on the LH wing. Note: the bolt heads must be on the inside of the braces as shown.
  • Page 18 WING REST ASSEMBLY 11 ft Center Frame 11FT REAR WING REST 11FT FRONT WING REST NOTE: CENTER WING (REQUIRED WITH 9’4” WINGS ONLY) REST ON MAIN FRAME 5/8NCx4x4-1/4 U-BOLT 11’ EXCEL CENTER FRAME 79150 13.38 (2PL) NOTE: CENTER WING REST ON MAIN FRAME 5/8NCx3 x5-1/4 U-BOLT ASSEMBLY MANUAL 74302 1/11...
  • Page 19 STEP 13: Install wing anchor (1) to main frame, inner and outer axles (2) using two 3/4” x 2-3/4” grade 5 bolts (3), and 3/4” top lock grade 5 hex nut. Bolts to be inserted (3) 88291 from outside to inside as shown. Do not tighten bolts.
  • Page 20 RH INNER WING LH INNER WING (3) 88291 (3) 88291 Repeat step 13 for RH and LH outer wings. STEP 14: Install anchor link (1) to wing anchor on the axle and the main frame. Use a 1-1/4” x 3-3/8” inch long pin (2) with two machine bushinWgs (3) and two 1/4”...
  • Page 21 DEPTH CONTROL 5 SECTION...
  • Page 22 OPTIONAL - SINGLE POINT DEPTH CONTROL SINGLE PT TUBE-SHORT 5/8 X 3NC HEX BOLT (88408) 5/8 NC LOCK NUT (88369) 1/2 X 2-1/4 NC BENT TUBE HEX BOLT ( 21487 ) (88825) 1/2 NC LOCK NUT (88363) ADJUSTMENT CRANK (222182) 1/4 X 2-1/2 ROLL PIN VALVE...

  • Page 23: Handle Assembly

    HANDLE ASSEMBLY ADJUST EAR (222107) NUT SHOULD BE POSITIONED FOR- WARD 1/4 X 2-1/2” ROLL (88767 SLIDE ADJUSTMENT (222111) JAM NUTS TOGETHER BOTTOM NUT 1/2 NC JAM ADJUSTMENT CRANK OUT ON NUT (88561) (222182) THREADS 1/2” NC HANDLE SHOULD NYLON LOCK ROTATE FREELY NUT (88621) AFTE ASSEMBLY...
  • Page 24 Install shaft end of 4x12 hydraulic cylinder (1) 358314 to wing anchors. Use headless pin (2) 1x3- 7/16, two fl at washers (3) 1 (1/1/16x2-1/2ACT) 2ZP, and two roll pin (4) 1/4x2-1/4 ZP. Use headless pin (5) and same washers and roll pin that were used in rod end for the base end of cylinder to center axle as shown.
  • Page 25 STEP 16: Thread 1-1/4” jam nut (1) onto the clevis adjust rod (2) and install in front end of the main frame anchor tube (1) as shown. Do this in two placeS.
  • Page 26 Slide the main frame anchor tube (1) from the back to the front of the frame over the front wing rest crossmember. Use a 1-1/4” x 3-3/8” long headless pin (3) with two machinery bushings (4), and two 1/4” x 2-1/4”...
  • Page 28 (1) 14131...
  • Page 31 (5) 4000360725...
  • Page 32 (7) 7) 88622...
  • Page 33 (5) 4000360725...
  • Page 36 (1) 14131...

  • Page 37: Hitch Assembly

    HITCH ASSEMBLY NOTE: ASSEMBLE ALL RIGHT, LEFT AND CEN- TER HITCH TUBE BE- FORE TIGHTENING 79149-3-2006 ASSEMBLY MANUAL 74304 1/11...
  • Page 38 HITCH ASSEMBLY CONTINUED LIGHT PLUG RETAINER TUBE (223329) HOLDER 5/16NCx1-3/4 TOP PLATE (234313) GR5 BOLT (221445) UTILITY (88480) POLE TUBE- (236142) CLAMP HALF OPERATOR’S 3/8 HOSE MANUAL 1/4NCx1 GR5 (220645) RUBBER BOLT (88203) EDGING 1/4NCx3/4 (236092) BASE PLATE GR5 BOLT (221443) (88993) 1NC LOCK...
  • Page 39 11’ & 13’ T/L HITCH A-FRAME 13’ LL QX² & XL² SIZES 11' & 13' T/L HITCH A-FRAME 13' LL PART # QTY DESCRIPTION PART # QTY DESCRIPTION ITEM ITEM CAST DUAL HITCH 13EXC CENTER LIFT TUBE BRACKET 42824 67743 11638 BOLT, HITCH SPECIAL 1-1/4 X 6-1/2 220785...
  • Page 40 T/L HITCH T-STYLE FLOATING 4000361016 T/L HITCH T-STYLE FLOATING PART NUMBER ITEM DESCRIPTION PIN-COTTER: 3/16 DIA X 2 ZP 88133 NUT-CASTLE: 1-1/4-7NC 2ZP 88350 CAST DUAL HITCH 55920 BOLT, HITCH SPECIAL 1-1/4X6-1/2 11638 T-HITCH WELDMENT 334051 88349 BOLT-HEX: 1-1/4-7NC X 6-1/2 5ZP 88622 NUT JAM 1-1/4-7NC 5Z 334677...
  • Page 41 13’ TL HITCH A-FRAME FLOATING QX² & XL² 13' TL HITCH A-FRAME FLOATING PART # DESCRIPTION ITEM BOLT, HITCH SPECIAL 1-1/4X6-1/2 11638 42824 CAST DUAL HITCH NUT-CASTLE: 1-1/4-7NC 2ZP 88350 PIN-COTTER: 3/16 DIA X 2ZP 88133 233670 13FT QUADX HITCH 88395 BOLT-HEX: 5/8-11NC X 5 5ZP 88369...
  • Page 42 OPTIONAL - HYD WEIGHT BALANCE KIT RELIEF CYLINDER 3/8 X 24 VALVE 2-1/2 X 8 FF HOSE (247423) (223324) BREATHER (13423) (247435) TEE 8MJ X 8MJ X ADP 8MORB X 8MORB BREATHER 8FJX (24004) (56534) (247435) EXISTING BOLT TEE 8MJ X 8MJ X 8MJ (13238) EXISTING HOSE...
  • Page 43 3' OUTER WING ASSEMBLY MANUAL 74304 1/11...
  • Page 44 5’ FLOATING OUTER WING W/GAUGE WHEEL ASSEMBLY MANUAL 74304 1/11...
  • Page 45 6’ FLOATING OUTER WING W/GAUGE WHEEL ASSEMBLY MANUAL 74304 1/11...
  • Page 46 WING LIFT COMPONENTS ASSEMBLY MANUAL 74304 1/11...
  • Page 47 Attach Outer Wing Hydraulic Gauge Wheel (4) 88369 NUT-LOCK: 2 POS 5/8-11 (4) 221366 BOLT-HEX: 1NC X 6.88 (1.5 IN ) (1) 220853 (4) 89075 Gauge Wheel Mount NUT-NYLOCK: 1-8NC (1) 4000361042 ASSY-WING GAUGE UPPER ARM (1) 88862 PIN-ROLL: 1/2DIA X 3-1/4 (1) 4000361051 (4) 88277 COLLAR-2.56 ID...
  • Page 48 HYDRAULICS-OUTER GAUGE WHEELS 700002 ASSEMBLY MANUAL 74304 1/11...

  • Page 49: Wing Fold Hydraulics

    11 Foot 19 & 25 WING FOLD HYDRAULICS 3/8x62 TEE 8MJ x 8MJ x 8MORB FF HOSE (56534) ELB 8MJ x 8FJX (15515) (25591) ELB 8MJ x 8MORB (25580) 3/8x78 FF HOSE 3/8x36 (13268) FF HOSE (14644) TEE 8MJ x 8MJ x 8MJ (13238) 3/8x324...

  • Page 50: Fold Hydraulics

    11 Foot 30 FOLD HYDRAULICS 3/8x56 FF HOSE (13265) 3/8x24 FF HOSE (13423) ELB 8MORB x 8MJ (25580) 3/8x65 FF HOSE (25602) 1/2x65 FF HOSE (25602) 4 X 30 CYLINDER (51229F) CROSS 8MJ (15910) ADP 8MORB X 1/2x240 (24024) FF HOSE (208562) QUICK COUPLER (247425)
  • Page 51 11 Foot 30 W/OUTER WINGS FOLD HYDRAULICS PORT 2 BUTT END OUTER WING SEQUENCE ELB 8MORB VALVE x 8MJ (65870) (25580) PORT 1 BUTT END INNER WING 3/8x56 FF HOSE (13265) 3/8x24 FF HOSE TEE 8MJ X (13423) 8MJ X8ORB (56534) 3/8x65 FF HOSE...
  • Page 52 13 Foot 32 & 37 FOLD HYDRAULICS 3/8x72 FF HOSE (67636) 3/8x36 FF HOSE (14644) ELB 8MORB x 8MJ (25580) 3/8x65 FF HOSE (25602) 1/2x30 FF HOSE (242448) 4 X 30 CYLINDER (51229F) CROSS 8MJ (15910) ADP 8MORB X 1/2x276 (24024) FF HOSE (241494)
  • Page 53 13 Foot 32 & 37 W/OUTER WINGS FOLD HYDRAULICS WING FOLD BUTT END OUTER WING FOLD SEQUENCE ELB 8MORB PORT VALVE x 8MJ ( 65870) (25580) PORT 1 BUTT END 3/8x72 INNER FF HOSE WING FOLD (67636) 3/8x36 FF HOSE TEE 8MJ X (14644) 8MJ X8ORB...
  • Page 54 Initial Assembly and Charging of Lift Systems All WIL-RICH lift systems should be assembled as noted in the appropriate assembly manual. For best functional results the following steps should be followed. 1) Position the main lift cylinders in the locations and connect the hydraulic circuitry as shown. Attach the base end of all cylinders but do not connect the rod ends.
  • Page 55 3 SECTION CULTIVATOR Wing Fold System Information Wil-Rich products use several varying designs to fold implement wings. All utilize a two-way cylinder of varying diameters and strokes. All wing fold cylinders use an integral or in-line restrictor to control the cylinder stroke speed. This restrictor is critical to the safe operation of the unit and use of non-Wil-Rich cylinders is not recommended.
  • Page 56 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 78 Insert two 25580 8MORB X 8MJ elbow fittings (1) into the depth control cylinders of the outer wings as shown. Route the hydraulic lines from both cylinders to the back of the outer wing. WR0402 STEP 79 Route the hydraulic lines along the back of the wing to...
  • Page 57 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 80 Install the 13215 clamp (1) for the hydraulic lines from the 67688F2 depth control cylinder on the inner wing to the frame using a 89375 3/8 x 1-1/2 inch carriage grade 5 bolt, 88362 lock washer and 88103 nut.
  • Page 58 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 83 Install the tee fittings (1) on both hydraulic lines from the lift cylinders. Continue running the depth control lines (2) along the frame towards the main frame. Attach the two wing lift hydraulic lines to 13238 to tees and route along the depth control lines (2) on the frame.
  • Page 59 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 85 On the inner wing frame secure the depth lines and then the lift lines using a 89473 3/8 x 2-1/2 inch carriage grade 5 bolt, 13215 clamp, 88362 lock washer, 88103 nut, 15543 base plate, a second 13215 clamp, 88362 lock washer and 88103 nut (1).
  • Page 60 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 87 Insert a 25580 8MORB x 8MJ elbow fitting (1) into the rod end port of the wing folding cylinder as shown. WR0409 STEP 88 Route the hydraulic lines of the wing lift cylinder looping slightly to the 13238 8MJ tee (1) that connects the two wing fold hydraulics at the center point of the main frame.
  • Page 61 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 90 Use clamps and cable ties (1) to secure the hoses and wiring harnesses as needed. WR0422 STEP 91 Connect the hoses running from the rear of the main frame and each other wing with 4-way tee fittings (1). On the right and left sides of the 4-way fittings clamp the lines to the main frame using a 89473 3/8 x 2-1/2 inch bolt, 13215 clamp, 88362 lock washer, 88103 nut, 15543...
  • Page 62 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 93 Connect and route the hydraulic hose (1) from the single point cylinder to the other single point cylinder (2). WR0431 STEP 94 Install a 3-way tee (1) into the single point hydraulic cylinder positioned as shown.
  • Page 63 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 96 Route the hydraulic lines towards the rear of the frame. Secure the hydraulic lines with a 89375 3/8 x 1-1/2 inch carriage grade 5 bolt, 13215 clamp, 88362 lock washer, and 88103 nut (1). WR0425 STEP 97 Follow the diagram (on Page 48) for connecting the hose...
  • Page 64 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 98 Route all the hydraulic lines along the hitch frame towards the hitch. Use a 89473 3/8 x 2-1/2 inch carriage grade 5 bolt, 13215 clamp, 88362 lock washer, 88103 nut, 15543 plate, 13215 clamp, 88362 lock washer and 88103 nut (1) to secure the hoses to the frame.
  • Page 65 3 SECTION CULTIVATOR Hydraulic Assembly (Cont’d) STEP 101 Be sure to keep electrical wire harness straight as it is routed to the hitch, securing it with cable ties to the hydraulic lines. WR0454 STEP 102 Use two large cable ties to secure the relief valve (1) to the frame bracket.
  • Page 66 3 SECTION CULTIVATOR Single Point Depth Control 20 21 * This single point assembly circuled is used on all 5 section models except for 60 ft. WR0499 Please refer to Maintenance for torque...

  • Page 67: Check Valve

    CHECK VALVE WITH SINGLE POINT VALVE CHECK VALVE (241317) TEE FROM ROD END PORT 2 OF WING LIFT CYLIN- DERS. PORT 3 ADP 8MORB X ADP 8MORB X BUTT END OF RIGHT 8MJ (24024) 8MJ (24024) MAIN LIFT CYLINDER BUTT END OF LEFT MAIN LIFT CYLINDER PORT 1 TEE 8MORB X...
  • Page 68 3 SECTION CULTIVATOR Single Point Depth Control (Cont’d) STEP 61 Insert the 222180 plunger (1) into the slide adjust securing it with two 89078 roll pins (2). WR0369 STEP 62 Install the 241488 single point inner tube (1) through the bushings installed in Step 92.
  • Page 69 -11 Foot 25 DEPTH CONTROL HYDRAULICS 3/8x400 FF HOSE (247432) 3/8x232FF HOSE (247431) 3/8x400 FF HOSE (247432) (2) 4 X 12 HYD CYLINDER (358314) 3/8x216 FF HOSE (240605) TEE 8MJ x 8MJ x 8MJ (13238) 1/2x80 FF HOSE (233250) (2) 3-3/4 X 12 HYD CYLINDER (358313) 3/8x216 FF HOSE...
  • Page 70 11 Foot 30 DEPTH CONTROL HYDRAULICS 3/8x400 FF HOSE (247432) 3/8x232 FF HOSE (247431) 3/8x400 FF HOSE (247432) (2) 4 X 12 HYD CYLINDER (358314) 3/8x232 FF HOSE (247431) TEE 8MJ x 8MJ x 8MJ (13238) 1/2x80 FF HOSE (233250) (2) 3-3/4 X 12 HYD CYLINDER (358313) 3/8x232...
  • Page 71 -13 Foot 32 DEPTH CONTROL HYDRAULICS 3/8x440 FF HOSE (247427) 3/8x264 FF HOSE (247428) 3/8x440 FF HOSE (247427) (2) 4 X 12 HYD CYLINDER (358314) 3/8x252 FF HOSE (233688) TEE 8MJ x 8MJ x 8MJ (13238) 1/2x80 FF HOSE (233250) (2) 3-3/4 X 12 HYD CYLINDER (358313) 3/8x252...
  • Page 72 -13 Foot 37 DEPTH CONTROL HYDRAULICS 3/8x460 FF HOSE (237913) 3/8x264 FF HOSE (247428) 3/8x460 FF HOSE (237913) (2) 4 X 12 HYD CYLINDER (358314) 3/8x284 FF HOSE (247459) TEE 8MJ x 8MJ x 8MJ (13238) 1/2x80 FF HOSE (233250) (2) 3-3/4 X 12 HYD CYLINDER (358313) 3/8x284...

  • Page 73: Depth Indicator

    DEPTH INDICATOR DEPTH INDICATOR 3/8 NC (69309) LOCK NUT (88162) DEPTH GAUGE (69303) ANGLE (69310) 3/8X3/4 HEX BOLT (88566) 4-1/2 EXHAUST 3/8 NC NUT CLAMP (88103) (69314) 3/8LK WASHER (88362) U-BOLT 3/8X4X3-3/4 (88514)
  • Page 74 3 SECTION CULTIVATOR Depth Gauge Assembly STEP 65 Use two 88514 3/8 x 4 x 3-3/4 inch U-bolts (1), four 88362 lock washers (2) and two 88103 nuts (3) to secure the 69303 depth gauge (4) to the frame. WR0434 STEP 66 Install the 69309 depth indicator arm through the depth gauge slot (1).
  • Page 75 3 SECTION CULTIVATOR Safety Light Assembly STEP 71 Use a 89347 1/2 x 3-1/4 inch U-bolt (1), two 88362 lock washers (2) and 88103 two nuts (3) to install the 223130 short base pivot to the frame (4). Insert 223140 12 x 12 inch light arm into the short base pivot (5).
  • Page 76 3 SECTION CULTIVATOR Safety Light Assembly (Cont’d) NOTE: Be sure to secure both lights offset arms inside the frame crossmember a minimum of 15 and a maximum of 50 inches (76 to 254 cm) from the center of the rear frame with the reflector (2) centered between the two arms (1).
  • Page 77 3 SECTION CULTIVATOR Safety Light Assembly (Cont’d) STEP 76 Route the wiring (1) for the 223143 amber lights along the rear wing rest as shown and secure to the wing rest with tie wraps (2) as needed to maintain a clean straight line.
  • Page 78 TWIN & SINGLE SPRING SHANK ASSEMBLY TWIN SPRING SHANK ASSEMBLY Attach shank (1) to each assembled twin spring assemblies (2) using 5/8-11NC x 1-3/4 grade 5 bolt (3) and lock washer 5/8” (4). SINGLE SPRING SHANK ASSEMBLY Attach shank (1) to each assembled single spring assemblies (2) using 5/8 x 1-1/2 grade 5 bolt (3) and lock washer 5/8”...
  • Page 79 TWIN SPRING SHANK ASSEMBLY TWING SPING SHANK HOLDER ASSEMBLY (240560) TWIN SPRING SHANK (55655) 5/8 LOCK WASHER BOLT 5/8x1-3/4 700419 (88129) (88838) ASSEMBLY MANUAL 74304 1/11...
  • Page 80 SINGLE SPRING SHANK ASSEMBLY SINGLE SPRING SHANK HOLDER ASSEMBLY (240434) SINGLE SPRING SHANK (53408) 5/8 LOCK WASHER (88129) BOLT 5/8x1-3/4 700420 (88577) ASSEMBLY MANUAL 74304 1/11...

  • Page 81: Preliminary Settings

    Level Main Frame - Front to Rear Front to rear main frame level is adjusted by chang- ing the setting of the clevis adjust rod above the main lift cylinder. See Fig 7. Loosen the jam nut and turn the threaded clevis adjust rod out of the main mast tube.
  • Page 82 11’MAIN FRAME 79115-11.PLT ASSEMBLY MANUAL 74302 1/11...
  • Page 83 13’ MAIN FRAME 79115-13.PLT...
  • Page 84 11’8” WING 79115W11.PLT...
  • Page 85 9’4” INNER WING 79115-9.PLT...
  • Page 86 7’ WING 79115-7.PLT ASSEMBLY MANUAL 74302 1/11...
  • Page 87 6’ OUTER WING 6FT OUTER WING SHANK PLACEMENT ASSEMBLY MANUAL 74302 1/11...
  • Page 88 5’ OUTER WING 79115-5.PLT ASSEMBLY MANUAL 74302 1/11...
  • Page 89 2' OUTER RIGID STUB 3' OUTER WING 79115-3.PLT ASSEMBLY MANUAL 74302 1/11...
  • Page 90 LIGHTS 1/4NCx1 BOLT AMBER OR RED (88208) LIGHT(223143) RED DECAL (22371) RED/ORANGE FLUORESCENT LIGHT/REFLECTOR DECAL (223118) BRACKET (223126) 3/8NCx3/4 SQ HEAD SET SCREW (88702) 12x12 LIGHT ARM (223140) 48" OFFSET LIGHT ARM 3/8NC NUT (223121) YELLOW DECAL (88103) (22372) AG LIGHT KIT (223330) AG LIGHT MOD- ULE(223145)

  • Page 91: Safety Decal Placement

    SAFETY DECAL PLACEMENT NOTE: Thoroughly clean areas were decals are to be applied be- fore applying decals to assure proper adhesion. Never walk or stand in the path DANGER of the wings. Completely lower wings before p e r f o r m i n g s e r v i c e o r STAND CLEAR AT adjustments.
  • Page 92 41508 WING LOCK DANGER DECAL 53334 CAUTION DECAL 41345 SMV KIT 20121 INTEGRAL RESTRICTOR DECAL SAFETY LIGHT PLACEMENT 22371 RED DEFLECTOR 22372 AMBER DEFLECTOR WARNING 64404 WIL-RICH DECAL HIGH PRESSURE FLUID HAZARD To prevent serious injury or death: Relieve pressure on system before repairing or adjusting or disconnecting.
  • Page 93 HOSE CLAMP ASSEMBLY 3/8 NUT (88103) BASE PLATE (15543) 3/8x137 3/8 NUT FF HOSE (88103) (235386) 3/8 LK WSHR (88362) TUBE CLAMP (13215) 3/8x1-1/2 CRG BLT (89375) SINGLE STACK 3/8x2-1/2 CRG BLT (89473) DOUBLE STACK 3/8x3-1/2 CRG BLT (89475) TRIPPLE STACK ASSEMBLY MANUAL 74304 1/11...
  • Page 94 OPTIONAL - HD AUXILIARY HITCH ASSEMBLY MANUAL 74304 1/11...
  • Page 95 HD REAR HITCH & BRACE ARMS RIGID HD_AUX_HITCH_001.wmf HINGED 79915 ITEM PART NO. DESCRIPTION 69455 REAR HITCH W/HINGED TOUNGE ITEM PART NO. DESCRIPTION (INCLUDES ITEMS 1,2,4-11) 233520 RIGHT BRACE ARM 69456 REAR HITCH W/RIGID TOUNGE 233521 LEFT BRACE ARM (INCLUDES ITEMS 1,2,3,10 & 11) 88453 5/8”NCX4”X4-1/2”U-BOLT 233522 REAR HITCH BRACE ARMS...

Table of Contents