Table Of Contents - Whirlpool 4XACM14DD0 Owner's Manual

Table of Contents

Advertisement

Operating
Your Air
Conditioner
I
I
In This
Section
Page
Using the AUTO COOL Cycle . . . . . . . . . . . . . . . 6
Modifying the temperature
7
. . . . . . . . . . . . . . . . . . . .
Modifying the fan speed _,........._............ 7
Using the AIR SWING feature . . . . . . . . . . . . . . . 7
Turning the unit off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the DRY ONLY Cycle . . . . . . . . . . . . . . . . . . 3
Using the SLEEP HOURS Cycle . . . . . . . . . . g
Page
Using the FAN ONLY Cycle . . . . . . . . . . . . . . . . 10
'0
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the CHECK FILTER light . . . . . . . . . . '0
Modifying the air direction
1 1
. . . . . . . . . . . . . . . . . . .
1 1
.......................
1 1
.....................
Operating your air conditioner
properly is
essential to obtain the best possible results.
This section tells you about each cycle and
how to operate it.
lMPCRTANT:After
turning the unit off,
wait approximately
3 minutes before
turning it back on. If you don't wait
approximately
3 minutes, the air
conditioner will try to start, but turn itself
off until the compressor is ready to start
again.
from its electrical supply. DO NOT use
an electrical outlet that can be turned
off with a switch. When the air condi-
tioner is disconnected
from its electrical
supply (including power outages) all
programming
reverts back to the
factory-preset
information.
However,
the air conditioner wili "relearn" your
preferences.
Using
the AUTO
COOL
Cycle
(Single-Button
Cooling)
AUTO
COOL
BURST
The AUTO COOL Cycle is designed to
AUTO COOL BURST cools the room for
provide you with the comfort you desire by
15 minutes before allowing the room to rise
continually
"learning" your preferences.
to your prelearned temperature. This cycle is
Once the Cycle "learns" what temperature(s)
especially useful if you are hot from exercise
you desire, it automatically
chooses a fan
or it is very hot in the room.
speed when turned on and cools the room
as quickly as possible.
NOTE: You can modify the fan speed and
temperature when using the AUTO COOL
Cycle, if desired. See "Modifying the fan
speed" or "Modifying the temperature"
on
page 7.
To activate
the AUTO COOL Cycle:
*Press the AUTO COOUON Button.
NOTE: When the cycle is active, the
indicator light on the AUTO COOL/ON
Button will be lit.
6
To activate
AUTO COOL BURST:
*Press the AUTO COOL/ON Button twice.
\I/
-m-
/I\
n
AUTO COOL
ON

Advertisement

Table of Contents
loading

Table of Contents