Beko HII64200SFMT User Manual page 18

Turning on the wide surface cooking zone
while one or both of the left cooking zones
are running
ü While one or both of the left cooking
zones are running, you can combine
both cooking zones by activating the
wide surface cooking zone. Thus, you
can utilise a wider cooking zone just at
the same level.
1. To turn on the wide surface cooking
zone while one or two of the left cooking
zones are active, keep key of both cook-
ing zones pressed simultaneously for
about 3 seconds.
ð Temperature value of the last se-
lected cooking zone will appear on
the display of the rear-left cooking
zone and the wide surface cooking
zone will be activated.
ð Combined cooking zones will con-
tinue operating with the temperat-
ure and the timer (if available)
value of the left cooking zone you
have selected. Value of the left
cooking zone that was set first be-
fore combining the cooking zones
will be cancelled.
ð To change the temperature, touch
/ keys of the rear-left cooking
zone and set the desired temperat-
ure.
If you touch key of the left cooking
zone while the wide surface cook-
ing zone is active, the cooking
zones will operate at booster level.
Turning off the wide surface cooking zones
ü Wide surface cooking zone can be
turned off in 4 different ways:
1. By dropping the temperature to "0"
level: You can turn the wide surface
cooking zone off by dropping the tem-
perature level to "0".
2. By using the switching off function
on the timer for the wide surface
cooking zone: When the time is over,
the timer will turn off the wide surface
cooking zone "0" will appear on the left
cooking zone display and "00" will ap-
pear on the timer display.
3. By touching
left cooking zones simultaneously: If
you touch
cooking zones simultaneously, the
cooking zones will be separated and
turned off.
4. By pressing key of both cooking
zones simultaneously for about 3
seconds: The cooking zones will turn
off if you press keys of both cooking
zones simultaneously for about 3
seconds.
Cleaning lock
The cleaning lock prevents operation of all
keys on the control panel for 20 seconds
while the hob is switched on to allow the
user to make a short cleaning. Product will
not draw any power throughout this time.
Activating the cleaning lock
1. Touch and hold the
single signal sound is heard when any
cooking zone is switched on.
2. A countdown begins from 20 on the
timer display of the hob. None of the
keys on the panel will function except
the key throughout this period.
EN / 18
/
keys of any of the
/ keys of any of the left
key until a
EN
DE
FR