Advertisement
Available languages
Available languages
cutter and this could lead to electric shock.
1.5.4. Use proper utensils to find any hidden beneath the surface pipelines, or contact the local utility
company. Entering into contact with live wires can cause fire and electric shock. The damage to the
pipeline could lead to an explosion. Penetrating a water line causes property damage or may cause an
electric shock.
1.5.5. Keep stable machine.
1.5.6. Clean vents of your rechargeable brush cutter.
1.5.7. Use only recommended battery and charger.
1.5.8. The battery should always be kept away from heat sources. Do not leave it for a long time in an
environment with high temperature (of the sun places near heaters or where the temperature exceeds 50
° C).
1.5.9. The charging time the battery should not exceed 1.5 hours, otherwise it may be damaged.
1.5.10. Avoid charging the battery at temperatures below 0 ° C.
1.5.11. The charger is designed to work with her. It should not be used for other purposes.
1.5.12. Do not place, any metal objects into the charger.
1.5.13. The battery must be recharged when it fails to produce enough power to operate. Do not
continue to use the chainsaw under these conditions. Follow the loading procedure. You can also charge
the battery partially used when you wish, without adverse effect on battery ..
1.5.14. To clean the battery brush cutter, use a soft, dry cloth. Never use any solvent or alcohol.
1.5.15. Before cleaning the charger, disconnect it from the network.
1.5.16. If you are charging the batteries one after another between charges make breaks of 30 minutes.
1.6. Special safety conditions at work with the charger.
Before proceeding to work with the charger must read all related to him and contained in this instruction
information and indications on the charger and battery, for which it is intended.
1.6.1. To reduce the risk of injuries and injuries charger should only be used to charge the batteries
of nickel-cadmium type. The batteries of another type may explode, causing serious injuries or property
damage.
1.6.2. The charger should not be exposed to the influence of moisture or water.
1.6.3. The use of attachment not recommended or sold items from the charger manufacturer jeopardized
by fire, causing injury or electric shock.
1.6.4. The power cord should not be walked on. It should not be located in the passage where people
pass and should not be subjected to any other danger (eg too much tension).
1.6.5. If not necessary, do not use extension cord. Using an improper extension cord may cause fire or
electric shock. If using an extension cord is necessary, first make sure whether the contact of the extension
corresponds to the pins on the original connector, power charger.
1.6.6. The extension must be in good working order.
1.6.7. Not for use charger with a damaged cord or plug. The damage must be repaired by a qualified
person.
1.6.8. Not allowed to use the charger if it has been subjected to a strong impact, fall or has been
damaged otherwise. Inspection and possible repair should be entrusted to an authorized service RAIDER.
1.6.9. Do not allow attempts to disassemble the charger. All repairs must be entrusted to authorized
service RAIDER. Improper installation of the charger threatening electric shock or fire.
1.6.10. Before conducting any scheduled maintenance or cleaning the charger, it should be unplugged.
1.6.11. The charger can be excluded from the mains when not in use!
2. Functional description and purpose.
Battery brush cutter is a handheld power tool powered by a battery. Powered by a collector motor DC
permanent magnet planetary and helical wheels and is designed for cutting and shaping of shrubs at
home. Not for use of rechargeable brush cutter for activities other than its intended purpose.
Not for use of the machine for activities other than its intended purpose!
3. Assemble the elements of battery brush cutter and commissioning.
Some parts of the cutter is dismantled in order to reduce the volume of the container during transport.
Inserting / removing the battery
Remove the battery before any manipulation or cleaning the machine.
39
Advertisement
