Raider PRO RDP-PSHT20 SET User Manual page 38

38 www.raider.bg
1. General instructions for safe operation.
Read all instructions. Failure to follow the instructions may result in electric shock, fire and / or serious
injury. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep work area clean and well lit. Cluttered and inadequate lighting may contribute to the
occurrence of accidents.
1.1.2. Do not operate the battery brush cutter in an environment with increased danger of explosion,
close to flammable liquids, gases or dust.
During operation of the rechargeable brush cutter can create sparks that can ignite the dust or fumes.
1.1.3. Keep children and bystanders away while operating a battery brush cutter.
If your attention be diverted, you may lose control over battery brush cutter.
1.2. Safety when working with electricity.
1.2.1. Plug the charger must be suitable for use contact. In no case be allowed to modify the plug.
When working with zeroed appliances do not use adapters plug.
Unmodified plugs and sockets reduce the risk of electric shock.
1.2.2. Protect Battery brush cutter from rain and moisture.
Water entering a rechargeable brush cutter increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Be alert, watch carefully their actions and act cautiously and wisely. Do not use rechargeable
brush cutter when you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating battery brush cutter can have the effect of severe injuries.
1.3.2. Use personal protective clothing and always wear eye protection.
Wearing suitable for use rechargeable brush cutter and activity carried personal protective equipment
such as dust mask, healthy tightly closed shoes with a stable tread protective helmet and silencers
(earplugs) reduces the risk of accident.
1.3.3. Avoid the danger of inclusion Battery brush cutter inadvertently. Carrying rechargeable brush
cutter with your finger on the switch, there is a risk of accident.
1.3.4. Do not overreach. Work in a stable body position and at any time maintain balance. So you can
control the battery brush cutter better and safer unexpected situations.
1.3.5. Dress properly. Do not operate with loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts Battery brush cutter. Loose clothes, jewelery or long hair can be caught
in the chuck.
1.4. Care of the battery brush cutter.
1.4.1. Do not overload the battery brush cutter. Use rechargeable brush cutter only in accordance with
its intended purpose. You will work better and safer when using appropriate rechargeable brush cutter in
specified by the manufacturer load range.
1.4.2. Keep rechargeable brush cutter in places where it can be accessed by children. Do not allow it
to be used by persons who are not familiar with how to operate it and not read these instructions. When
in the hands of inexperienced users, rechargeable brush cutter can be dangerous.
1.4.3. Keep rechargeable brush cutter care. Check that the mobile units are functioning flawlessly,
if not spells that have broken or damaged parts that violate or alter the functions of rechargeable brush
cutter. Before using rechargeable brush cutter damaged, have the tool repaired. Many accidents are
caused by poorly maintained power tools.
1.4.4. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less resistance and working with them easier.
1.4.5. Battery Use a brush cutter, attachments and tools, according to the manufacturer's instructions.
Respecting and specific working conditions and operations that must follow. The use of rechargeable
brush cutter for purposes other than those intended increases the risk of occurrence of accidents.
1.5. Instructions for safe handling specific to your purchased rechargeable brush cutter.
Attention! Loss of control over the power tool may result in the occurrence of accidents.
1.5.1. Do not use accessories that are not recommended by the manufacturer specifically for this
power tool. The fact that you can attach to the machine definitely accessory or working tool, not ensure
safe handling.
1.5.2. Never place your hands near the rotating work tools.
1.5.3. If you run activities where there is a risk cutting tool may contact hidden wiring, hold the tool
only for the insulated gripping. Upon entering the tool in contact with live wires it metal parts Battery brush