AXIS C1410 Mk II Network Mini Speaker
Specifications
Buttons
Control button
The control button is used for:
•
Calibrating the speaker test. Press and release the control button and a test tone is played.
•
Resetting the product to factory default settings. See Reset to factory default settings on page 46.
Microphone disable switch
For location of the microphone disable switch, see Product overview on page 42.
The microphone disable switch is used to mechanically turn the microphone ON or OFF. The factory default setting for this switch
is ON.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NO
NOTICE
NO
TICE
TICE
The device shall be connected using a shielded network cable (STP). All cables connecting the device to the network shall be
intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see the Installation Guide at www.axis.com.
43