Light - Axis C1410 Mk II User Manual

AXIS C1410 Mk II Network Mini Speaker
The web interface
Shows the configured storage for the device. To configure the storage, you need to be logged in as an administrator.
Audio site security
CA certificate: Select the certificate to use when you add devices to the audio site. You have to enable TLS authentication in
AXIS Audio Manager Edge.
Save: Activate and save your selection.
Speaker test
You can use the speaker test to verify remotely that the speaker works as intended.
Calibrate: You need to calibrate the speaker before its first test. During calibration, the speaker plays a series of test tones that are
registered by the built-in microphone. When you calibrate the speaker, it must be installed in its final position. If you move the
speaker later, or if its surroundings change, for example, if a wall is built or removed, you need to recalibrate the speaker.
Run the test: Play the same series of test tones that were played during calibration, and compare them with the calibration's
registered values.

Light

Overview
Light status
Shows the different light activities that run on the device. You can have up to 10 activities in the light status list at the same
time. When two or more activities run at the same time, the activity with the highest priority shows the light status. That row
will be highlighted in green in the status list.
Profiles
Profiles
A profile is a collection of set configurations. You can have up to 30 profiles with different priorities and patterns. The profiles are
listed to give an overview of name, priority, and light and siren settings.
Create: Click to create a profile.
• Preview/Stop preview: Start or stop a preview of the profile before you save it.
Note
You can't have two profiles with the same name.
• Name: Enter a name of the profile.
• Description: Enter a description of the profile.
• Light: Select from the drop-down menu what kind of Pattern, Speed, Intensity, and Color of the light you want.
• Siren: Select from the drop-down menu what kind of Pattern and Intensity of the siren you want.
•
• Duration: Set the duration of the activities.
- Continuous: Once started, it runs until it's stopped.
- Time: Set a specified time for how long the activity will last.
- Repetitions: Set how many times the activity should repeat itself.
Start or stop a preview of only the light or siren.
16