Table of Contents
Advertisement
Tilt the joystick (&, T) to select the preferred setting and press
SELECT.
• When
"1 LPCM 96k-_48k"
is selected
1 No (Factory
preset):
oDigital audio of 48 kHz/16
bit is output during playback
of the DVD recorded
in
Linear PCM of 48 kHz.
oNo digital audio is output during playback of the DVD recorded
in Linear PCM of
96 kHz.
eHowever,
audio will be output using the original audio recording system in case
of the DVD which has not been copyright-protected.
2 Yes:
During playback
of the DVD recorded
in Linear PCM of 48 kHz or 96 kHz, digital
audio converted to 48 kHz/16
bit is output.
(Digital
output of PCM audio is restricted to 48 kHz/16
bit or below for copyright
protection.)
• When
"2 Dolby Digital"
is selected
1 Bitstream
(Factory
preset):
Dolby
Digital (AC-3)
bitstream
(lch-5.1ch)
is output during playback
of the DVD
recorded
in the Dolby Digital (AC-3).
Select
this setting when the player
is connected
to the Dolby digital (AC-3)
de-
coder.
2 PCM:
Digital audio converted to PCM (2ch) of 48 kHz/16
bit is output during playback of
the DVD recorded
in the Dolby Digital (AC-3).
• When
"3 dts" is selected
1 Off (Factory
preset):
No digital audio is output during playback
of the DVD recorded
in dts.
2 Bitstream:
dts bitstream
is output during playback
of the DVD recorded
in dts. Select this set-
ting when the player is connected
to the dts decoder.
Setting
is finished
and the screen
illustrated in step 3 is displayed.
For your reference:
•
To
return
to the
previous
oSee
page
62 for the recommended
set-
menu
ting of "6 Digital Audio Output".
Press R_ETURN.
oln
the case
of the
remote
control,
the
items
can be selected
using the cursor
buttons
instead of the joystick.
• To finish the initial settings
Press
MENU
at
the
initial
settings
screen illustrated in step 1 on page 51.
(In the case of the remote control, press
ACTION
or MENU.)
61
Advertisement
Table of Contents
