Panasonic PalmTheater DVD-L50D Operating Instructions Manual page 20

Control reference guide
Remote control unit I
Buttons used for basic operations
PLAY button
Press to start playback.
(See page 31 .)
If this button is pressed in the
standby mode (if the AC
adaptor is used), the player will
be turned on. When the disc is
loaded, playback starts
automatically. (It is impossible
to turn on the player with the
remote control unit if the player
is powered by the battery pack.)
PAUSE button
Press to place the player in
the still picture/pause mode,
(See page 34.)
STOP button
Press to stop playback.
(See page 32.)
If this button is kept pressed
when the player is ON, the player
will be set to the standby mode
(if the AC adaptor is used) or the
player will be turned off (if the
battery pack is used).
DISPLAY button
Press to show the On-Screen
Menu Icons. (See page 37.)
TITLE button
Press tO show the title menu
recorded on the disc.
(See page 43.)
Cursor buttons/SELECT button
Make the selection by pressing the
cursor buttons (A, T, "<, I_), and
then press SELECT to enter the
selection. (See page 31 .)
SKIP buttons
Press for skipping
ahead/back.
(See page 33.)
HI< : Reverse direction
I_ : Forward direction
SLOW/SEARCH buttons
Press for rapid advance/
reverse (see page 33) or
for slow-motion play (see
page 35).
44: Reserve direction
IH_: Forward direction
MENU button
When pressed during play, the DVD menu
recorded on the disc will be displayed.
(See page 43.)
When pressed in the stop mode, the initial
settings screen will be displayed.
(See page 51.)
20