Kohler PANACHE K-22106T-2 Installation Instructions Manual page 8

2. Put the tank onto the fixing bracket as shown in the right
figure and adjust the tank to level . Then tighten screws
with hex-head key. Note: it is a must to keep the tank level.
Connect the inlet hose with tank inlet pipe.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
3. Install the mask in the block screen of the tank, and tighten
the screw to fix mask to the tank.
3.
4. Insert the inlet pipe and drainage pipe into the bowl, and
then adjust the syphon and drainage pipe to a proper
position to be fixed into the bowl. Make sure of the
positions of syphon and discharge elbow and then remove
the bowl.
4.
1206284-T01-C
2.
1.
2.
Connecting Pipe
Water Pipe
Level
Tank
Loosen
Tighten
Medium Allen Key
Screw
Discharge Elbow
-4-
Block Shield
Mask
Screw
Inlet Pipe
Drainage Pipe
Syphon