Panasonic KX-TC1867B Operating Instructions Manual page 74

74
» Before Requesting Help
Problem l Remedy
You cannot operate the The handset user is operating the
answering system at the -answering system, or the handset is in
base unit. ' the programming mode. Wait until the IN
; USE/CHARGE indicator light goes out.
- You cannot operate the Make sure you enter the correct remote
answering system from a code.
touch tone phone. @The answering system may not respond
if the tones are too short to activate the
unit. Press each button firmly.
@The answering system is off. Turn it on
(p. 65).
You cannot operate the Someone is operating the answering
answering system with the system. l
handset. eYou are too far from the base unit. Move
closer to the base unit.
əThe unit is recording a message.
To answer the call, press (TALK).
While recording a greeting oTo answer the call, press
message, the unit starts to DIGITAL SP-PHONE), or lift the handset
ring and stops recording. off the base unit or press (TALK). Start
again from the beginning after hanging
up.
During playback, the unit oTo answer the call, press
starts to ring and stops (DIGITAL SP-PHONE), or lift the handset
playback. off the base unit or press (TALK). To
resume playback, press
after hanging up.
The handset does not əPlace the handset on the base unit
display the name and/or correctly (p. 53).
number of the caller whose elf the caller is not stored in the Caller
message is being played. © List, the handset will not display the
caller's information.
The unit does not alert your The line mode selection is incorrect.
pager. See page 17.